Our Blog

Refrigerator that is not defrosting - it’s a real problem. But, don’t worry. This problem you can solve by yourself. All you need is to check the defrost heater. The defrost heater turns on several times throughout the day to melt away any frost that may have accumulated on the evaporator coils. If the defrost heater is defective, the defrost system will not work, and frost will continue to accumulate on the evaporator coils. So, you must replace the defrost heater in the refrigerator GE gss25gshss. Follow our simple guide, be careful and wear working gloves. 

Wrong temperature of your washer could damage clothes. That’s why it’s important to always set the right temperature. But what you will do, if you set the right temperature and washer gives wrong. It’s easy to fix. Most common solution in this case - replacing water temperature switch. Let’s begin to replace the switch in your Whirlpool wtw5000dw1. 

Your cooktop stopped working? Don’t panic. If you have problems with burners, it could be fixed at home by yourself. Probably the problem could be solved by replacing the spark igniter switch. Process or replacement not for beginners, you need to have some experience before. Just follow our instructions and be carefull. Always wear working gloves. Let’s start the process of replacement of spark igniter switch in cooktop Wolf cf365t/s. 

Modern ovens - are very comfortable, they can save our time. But sometimes, you may face the problem with no baking. There are a lot of reasons why your oven doesn't bake. One of the most common solutions will be to replace the temperature sensor. We have a fast and easy 6 steps guide, which could help you to fix oven Kenmore 911. Things that you need before starting: 1/4-inch nut driver, needle-nose pliers, work gloves, manufacturers approved temperature sensor. Let’s begin.

Dishwasher - most used appliance at home, when it’s broken - terrible. Today we will speak about the problem with the dishwasher Carrier MDWFS014LSO - stopping at mid cycle. Stopping - not rarely case, so there are many issues. One of them - dishwasher vent and fan assembly. The control panel goes blank and the dishwasher stops in the middle of the cycle if the fan fails. Replace the vent and fan assembly if either the fan or vent fails. For replacing, be ready with: Torx screwdriver, slot screwdriver, work gloves and new manufacturers approved part. 

Not cooling the refrigerator well is a real problem. It could spoil products and food. So we recommend you to fix this problem immediately. Not cooling well in the refrigerator, is not a great problem and could be fixed alone at home. In most cases to solve this problem, all you need is to replace the defrost sensor. Before starting, prepare some tools: 1/4-inch nut driver, screwdriver, work gloves, wire stripper, manufacturers approved defrost sensor. Let’s begin!