It is often the case that a certain breakdown detected in the device can have several causes of origin. At the same time, the root cause of the malfunction does not always lie in the element in which it first appears. This often happens with remote controls and air conditioning control panels. Yes, if the remote control has stopped working, it does not mean the reason for the malfunction lies in the remote control or the photo receiver on the air conditioner control board.
The remote control and the air conditioner should be tested during diagnosis. By the way, if you come across a non-working control panel on the air conditioner, diagnostics and further repair of the air conditioner should be carried out as soon as possible because, in most cases, full control over the HVAC system will be unavailable.
The owner of this AC complained that the air conditioning control panel upstairs had gone blank. Replacing batteries brought the screen back on, but the unit wouldn't start up anyway. A Prime Air Solutions company offers HVAC Inspection in San Diego. After the primary check-up, our contractor found out that the reason for the malfunction was a faulty P-trap and safety switch. Replacement of the primary drain line p-trap and secondary line safety switch and rerouting of the secondary drain line eliminated the breakdown.
If you need help diagnosing or repairing an air conditioner, contact the Prime Air Solutions service center. A specialist will come to you and determine the type of problem and recommend the best way to solve it. To arrange a visit, call at (619) 655-3355.
Post Gallery
