There is no necessity to explain how important it is to have a properly working furnace when the temperature drops. No matter whether you are using Admiral furnace or another brand, this issue happens really often. Before arranging a repair assistant’s visit, make sure the blower motor is not dirty. When the motor is dirty, the heat exchanger isn't exposed to enough moving air. Clean the flame sensor and burners. If all the manipulations above have no positive effect, check the igniter for a failure. The furnace won’t ignite if the glow plug is old and needs replacing. Despite even the most meticulous care and diligent home maintenance, nothing is made to last forever. Eventually, your glow plug may “flame out.” If this failure occurs, the only thing to do is purchase a new glow plug and replace the old one. Until you do, you will be unable to use your furnace. Fortunately, glow plugs are not expensive to purchase, the only difficulty is a proper replacement. If you don’t feel free about the furnace repair – it’s time to call a Pro. It could be a faulty blower motor switch, leaky ductwork, or a wiring problem on your thermostat. You’ll want a qualified professional to take care of these problems. If you have questions about how you can test your Admiral furnace parts for a failure, contact our customer support. Our HVAC repair technicians will maintain your overall furnace system.
November 26, 2023
AC is leaking from the coil – HVAC Troubleshooting in San Diego
Have you encountered a leaking air conditioner? This causes not the most pleasant feelings and deprives you of comfort. Before solving this problem, you should determine what exactly became the source of the air conditioner flow.
