If your oven won’t turn on - you can fix it without any help. Problem could be solved by replacing the temperature control thermostat. The temperature control thermostat monitors the temperature inside the oven and cycles on the heat when the oven temperature gets too low. If the temperature control thermostat fails, the oven won’t turn on. In this article you find instructions on how to replace the temperature control thermostat in the Bertazzoni PROF366DFSXT oven and similar models. Process of replacement is easy and doesn't need any professional skills. Let’s start.
Remove the outer back panel of the oven. Inside the oven, release the oven sensor bulb and sensor tube from the bracket at the back of the inside of the oven. Push the sensor bulb and tube out of the hole in the back of the oven. From behind the oven, pull the sensor bulb and tube completely out of the oven. Remove the thermostat. Position the new oven control thermostat in the control panel. Thread the sensor bulb from the control panel area to inside of the oven. Clip the new oven sensor bulb and tube into the mounting bracket. Properly connect the wires to the new oven control thermostat. Push the stem of the oven control thermostat through the front of the control panel. Line up the mounting screw holes, insert the mounting screws and tighten them firmly. With someone's help, lift the oven into the cabinet. Reinstall the mounting screws on the sides of the oven cabinet that hold the oven in place. Push the control knob onto the stem of the new oven control thermostat. Reset the house circuit breakers for the oven to restore electrical power.
Make some tests. Now your oven must work like a new one. Feel difficulties during replacing the control thermostat - you can contact our customer support team and arrange an appointment at the convenient time.
