Your cooktop stopped working? Don’t panic. If you have problems with burners, it could be fixed at home by yourself. Probably the problem could be solved by replacing the spark igniter switch. Process or replacement not for beginners, you need to have some experience before. Just follow our instructions and be carefull. Always wear working gloves. Let’s start the process of replacement of spark igniter switch in cooktop Wolf cf365t/s.
Unplug the power cord from the wall outlet and then close the gas supply shut-off valve. Remove all the cooktop grates and then lift the gas burner caps off the burner heads. Remove the screws that hold the burner heads in place and then remove the burner heads. Pull the control knobs off of the burner control valves. Remove the screws that secure the main top to the top of the burner orifice holders. Lift the main top off of the cooktop and set it aside. Take a photo of the wires attached to the existing spark module or tag them with labeled masking tape so you can connect them correctly to the new spark module. Disconnect all the wires attached to the spark module. Remove the bushings from the stems of the burner control valves. Pull the spark igniter switches off of the burner control valves. Remove the switch and harness assembly from the cooktop and discard it. Push the new switches onto the stems of the burner control valves. Reinstall the bushings on the burner control valve stems. Using the digital picture or marked tape as a guide, connect the wires to the new spark module. Position the main top on top of the burner orifice holders. Insert and tighten the screws that secure the main top to the orifice holders. Push the control knobs on the burner control valves. Position the burner heads in the correct locations, screw them into place and tighten the screws firmly. Cover the burner heads with the burner caps in the correct locations. Set the grates in place on the cooktop. Plug the power cord into the wall outlet and open the gas shut-off valve.
Done! Your cooktop must work like a new one. If you need help with replacing this part - you can contact our customer support team and arrange an appointment at the convenient time.
