You can’t start your dishwasher? Seems it’s broken and won't start. Don’t be upset.In most cases the dishwasher Kenmore 665 that won’t start could be repaired by replacement by door latch. The door latch ensures that the dishwasher door latches shut. If the door does not latch properly, the door switch might prevent the dishwasher from running. If the door latch is broken, replace it. We prepared for you a simple guide that helps you to replace it alone.
Unplug the dishwasher or shut off the house circuit breaker for the dishwasher. To verify that power is disconnected, make sure that you can't activate the display on the control panel. Remove the Torx screws from the inner door panel, supporting the outer door panel with one hand as you remove the final 2 screws so the outer door panel doesn't fall. Separate the outer door panel and control panel from the inner door panel, and let the outer panel rest on the floor while you disconnect the user interface control wire harness from the control panel. Pull off the outer door panel and control panel. Unplug the door switch wire harness from the latch assembly. Release the locking tabs and pull the door latch assembly out of the inner door panel. Insert the new door latch assembly and engage the locking tab. Plug in the door switch wire harness. Position the outer door panel and control panel close enough to the inner door so you can reconnect the user interface control wire harness. Reconnect the user interface control wire harness and attach the outer door panel and control panel to the inner door panel. Reinstall the mounting screws. Reset the house circuit breaker or plug in the dishwasher to restore electrical power.
Here we are. Problem with not starting dishwasher - solved. If you think that process of replacement is difficult for you, Give us a call and appoint a visit at a convenient time! We can help you!
