Not turning dryer - is a real problem. There are not so many issues in this case. Today we will talk about one of the most common solution - timer. If your Whirlpool wed4815ew1 don’t want to turn off - time to replace the timer. It’s easy to do, follow our simple guide and you will fix that problem alone. Prepare some tools: 1/4-inch nut driver, Phillips screwdriver, slot screwdriver, work gloves. Let’s start!
Unplug the dryer. Pull the timer control knob off of the timer stem on the front of the control panel. Move the dryer forward and use a 1/4-inch nut driver to remove the screws from the back panel. Remove the back panel from the dryer and set it aside. Note the location of wires attached to the back of the timer before removing them. Label the wires or take a photo so you know how to reconnect them later. Remove the wires from the back of the timer. Remove the mounting screws and then remove the timer. Insert the new timer in the control panel and secure it with the mounting screws. Attach the wires to the new timer, following the labels or digital photo. Position the panel on the back of the console. Line up the mounting screw holes, insert the mounting screws and tighten them firmly. Push the control knob onto the stem of the new timer. Plug the dryer into the wall outlet. If it's a gas dryer, turn on the gas supply to the dryer.
Fixed! See? It’s very simple! If you need help during the process, or for something else - give us a call and appoint a visit at a convenient time!
