Modern ovens are very comfortable, have many programs, and make our life more simple, without hours to stay near the oven. When your oven is not heating, it must be fixed immediately. Most common solution is broil element. Fortunately it is simple to change, and doesn't take a lot of time. Our step-by-step guide will help you to replace the broil element in Electrolux eob2100cox. Before we start, prepare some tools: nut driver set, pliers, work gloves, broil element (we highly recommend you to use only manufacturer-approved).
- Turn off power to the wall oven. Shut off the circuit breakers for the wall oven.
- Removing the broil element. Open the oven door and remove the oven racks. Remove the broil element mounting screws. Remove the broil element support mounting screws and remove the supports. Carefully pull the broil element forward to expose the wires connected to the back of the element. Disconnect the wires, taking care not to let the wires slip through the holes at the back of the oven. If the wires slip through the holes, you’ll need to pull the oven out of the cabinet and remove the back cabinet panel to retrieve them. Use pliers to pull the wires off the broil element if necessary. Remove the broil element.
- Installing a new broil element. Connect the wires to the broil element. Push the ends of the broil element through the holes in the oven cavity and reinstall the mounting screws. Reinstall the broil element supports and secure them with the mounting screws. Reinstall the oven racks and close the oven door.
- Connect electrical power. Turn on the house circuit breakers for the wall oven.
Need help? Don’t hesitate to contact our customer support and arrange a meeting!
