If you find the dishwasher buttons are not working, there are a couple of potential reasons why this is occurring. First, the problem with connecting power (cords, outlet, etc.). Second is the electronic control board. In this article you will find a simple step-by-step guide on how to change electronic control board on your dishwasher GE GDT580SSF8SS. Before start prepare some tools: Torx screwdriver, slot screwdriver, nut driver set. work gloves, electronic control board.
- Shut off electrical power, unplug your dishwasher (you can use circuit breaker).
- Outer door panel and control panel must be removed. With the dishwasher door open, remove the Torx screws from the inner door panel. Support the outer door panel with one hand as you remove the final 2 screws so the outer door panel doesn't fall. Separate the outer door panel and control panel slightly from the inner door panel, and let the outer panel rest on the floor while you disconnect the user interface control wire harness from the control panel. Pull off the outer door panel and control panel.
- Disconnect electronic control board. Lift the locking tab, slide the control board slightly left and then release it from the inner door panel. Release the cover locking tabs and remove the electronic control board cover. Release the wire harness connector brace and connector box cover. Disconnect the electronic control board wires.
- Installing a new control board. Connect the electronic control board wires to the new control board. Install the wire harness connector brace and connector box cover. Reinstall the electronic control board cover. Push the new electronic control board into the mounting slots and slide it to the right to engage the locking tab.
- Installing outer door panel and control panel. Position the outer door panel and control panel close enough to the inner door so you can reconnect the user interface control wire harness. Reconnect the user interface control wire harness and attach the outer door panel and control panel to the inner door panel.
- Connect the dishwasher to electrical power (or turn on circuit breaker).
Fixed! Still have some problems? You can contact our customer support team and arrange an appointment at the convenient time.