Refrigerators won’t stay cool? It’s a real problem for your products. So we recommend you to fix that problem immediately. Most common solution is to replace the thermistor. The thermistor monitors the refrigerator temperature and sends the temperature reading to the control board. The control board regulates power to the compressor and evaporator fan based on the thermistor readings. If the thermistor is defective, the compressor and evaporator fan may not run when necessary. As a result, the refrigerator will not be cold enough. Just follow our instructions to replace the thermistor in your refrigerator Viking Vcsb423ss. Before you have started you need to prepare some tools: 1/4-inch nut driver, screwdriver, work gloves, new thermistor.
Unplug the refrigerator or shut off the circuit breaker for the refrigerator. Locate the thermistor in the refrigerator section; it’s under a small plastic cover attached to the surface of the back wall, side wall or ceiling. Release the thermistor cover and pull the thermistor out of the cover. Pull the thermistor out of the mounting clip and unplug the wire harness. Remove the thermistor. Attach the thermistor to the mounting clip and then to the wire harness. Reattach the thermistor's cover and reinstall any shelves you removed. Plug in the refrigerator or turn on the house circuit breaker to restore power.
Fixed! Your refrigerator must work like a new one, without problems with cooling. Feel difficulties during replacement? You can contact our customer support team and arrange an appointment at the convenient time.
