Not working the oven, usually means that you have problems with the electronic control board. In this article you will find an answer for the question: “How to replace the electronic control board in my GE Monogram oven ZEU36KSKSS?”. It’s not as difficult as seems.
- Unplugging the range. Set cardboard on the floor in front of the range to prevent scratching the floor. Pull the range out of the cabinet and unplug the power cord.
- Removing the control panel back shield.
- Removing the oven control board. Take a photo of the wires attached to the control board to document their locations so you can attach the wires to the new oven control board the same way. Disconnect all the wires from the oven control board. Remove the mounting screws and pull the oven control board out of the control panel.
- Attaching the overlay to the new oven control board. If the overlay on your existing oven control board is in good shape and you’re going to use it on the new oven control board, carefully pry off the existing overlay using a putty knife. Enough adhesive residue will remain on the back of the overlay so you can attach the overlay to the new oven control board. Transfer the overlay from the existing control board. If you bought a new overlay for the control board, attach the new overlay to the control board.
- Installing the new oven control board. Position the electronic oven control board and reinstall the mounting screws. Carefully connect all the wires to the new oven control board using your digital image as a reference.
- Reattaching the control back shield. Place the control panel back shield on the back of the control console and secure the back shield with the mounting screws.
- Restoring power. Plug the power cord into the electrical outlet. Carefully slide the range back into the cabinet, ensuring that the rear leveling foot properly engages with the anti-tip bracket so the range doesn’t fall forward when you open the oven door and pull out a loaded oven rack. Use a helper if necessary.
Start the oven and make some tests. If you can't replace the control board by yourself, give us a call and appoint a visit at a convenient time!