One of the most common problems of all types of ven - is timer. It could give wrong time, or can’t sound when time is out. To fix all these problems there is one thing you need to do - replace the timer. In this article you will find a short and simple instruction which helps you to replace the timer on the oven GE Monogram ZGP486NDNSS.
First turn of or disconnect the oven from the mains and remove it from the cavity. If the knobs on your oven have different markings take a photo of the layout as a reminder. The knobs can then be prised off with a flat blade screwdriver using a cloth to prevent damage to the surface. Remove the screws on the top panel and lift it off to access the timer module. Remove the timer module.in this model it simply unclips by pressing these tabs with a screwdriver. When replacing the module the new one may be slightly different. The old one has one relay, while the new one has two. Fit the new module in place and transfer the connections across so they match the original. Refit the knobs using your reference photo then replace the top panel. Reconnect or turn on the power to the oven, resetting the clock will allow the oven to function again. If the oven is working as normal it can be reinstalled.
Done! Make some tests, setup timer for 5-10 minutes just to see that it’s working. If you can't replace the timer alone, give us a call and appoint a visit at a convenient time!