If your refrigerator isn't cold enough, first check whether containers are blocking air flow at the vents. Today we will troubleshoot Whirlpool Refrigerator wrx735sdhz not cooling properly. Most common solution in that case is a condenser fan. In this article we made for you a step-by-step guide on how to change the condenser fan by yourself.
- Shut off electrical power. Unplug the power cord from the wall outlet.
- Removing the rear compartment cover. Pull the refrigerator away from the wall. Remove the screws from the rear compartment cover and then remove the cover.
- Removing the condenser fan motor. Remove the front base screw from the fan motor bracket. Pivot the bracket toward the compressor and remove the rear bracket base screw. Tilt the fan motor bracket toward the condenser and remove the upper mounting screws that hold the condenser fan motor in the bracket. Tilt the motor bracket toward the compressor and remove the fan motor from the bracket. Unplug the fan motor wire harness and pull out the motor. Pull off the fan blade.
- Installing the new condenser fan motor. Install the fan blade on the new motor. Plug in the motor wire harness. Position the new motor on the motor bracket and reinstall the upper mounting screws. Reinstall the base bracket screws.
- Reinstalling the rear compartment cover. Position the rear compartment cover on the back of the refrigerator and reinstall the mounting screws.
- Turn on electrical power. Connect all cords, and push your refrigerator back into place.
If this doesn't work, there could be a defective part that requires a replacement, and you may need to consult a professional.
Post Gallery
No items found.
