If the freezer is not cold enough, then before calling a specialist, you need to make sure that this situation has arisen due to equipment breakdown, and not due to other factors. Very often, it is the improper maintenance of equipment that leads to this scenario. But do not worry, such issues can be eliminated with your own hands. First, you need to check the thermostat. It should be in a position between 3 and 4 of the operating mode, when the food freezes normally and the motor does not suffer from increased load. In this case, the temperature in the compartment should be between 18-19 ° C. Sometimes, when placing food in the freezer, the owner turns the thermostat accidentally. If the thermostat is set in the wrong position, you just need to move it to the optimal position. After a while, it is worth checking if the freezer has started to work normally. Secondly, the freezer does not freeze well due to the ice buildup. When a large ice coat is formed, the seal does not fit tightly that means that warm air enters the freezer. That is why a puddle may form on the floor. To eliminate this nuisance, it is necessary to defrost the freezer and thoroughly rinse and clean the rubber seal. When the issue is not about steps above, it is time to check the thermostat for defects. The thermostat might have shorted out, which means the freezer can't accurately determine how cold it is. If this is the case, the refrigerator would probably not be working, either. A compressor may also require a check. When the compressor becomes faulty, your fridge cannot operate correctly, and you run the risk of having to throw food away. Replacing a compressor is a very difficult repair to make and involves welding. You should only attempt this repair if you are experienced and/or a qualified technician. It is also a very dangerous repair to carry out, as it involves working with highly flammable gasses.
Post Gallery
