My Samsung Dishwasher Has No Power (SOLVED)

This issue needs a thorough check as there are several factors which might refer to the current breakdown. In fact, when the deal concerns a control board, you probably need to replace this part. It is hard to fix and requires replacement in most cases. The control board regulates the various functions of the dishwasher. This part is often misdiagnosed. We strongly recommend checking more commonly defective parts before replacing the main control board. Please ensure that you have disconnected the appliance from the mains before starting any repair. Due to the sharp edges exposed we suggest suitable Safety Gloves are worn to help prevent injury when carrying out this repair. The first thing to do is to loosen the lower door skin, which you do by removing the screws on the back. There is no need to remove them completely, just loosen them as much as you can. With you loosening these screws that hold the lower door skin in place, it will give you enough room to be able to then proceed to remove the top control panel. Again this is done by undoing the screws that are currently holding it in place. Now that the control panel is out of the way, you can see things more clearly. If we follow this black lead, you can see that it attaches to a sensor, and you will need to lift that out before you are able to remove the control board. Once all the electrical connectors are connected you can replace your light guide into position, and then you can re-screw the control board into place. You next need to replace the sensor back in the door. The final thing left for you to do is to refit the control panel to the door and screw it all together again. Once the control panel is screwed into place, you can tighten the screw on the lower door skin. Estimate your potential before doing any maintenance and call for a Pro when your safety is doubting.