It is a confusing thing to find out a new appliance is malfunctioning. What’s more predictable to see that some old units break down. Today we will discuss a problem connected with overheating dryer on example Whirlpool 1LG5701XKW0. It could be three common issues.
First - restricted airflow. The single most common reason why clothes dryer overheat is restricted airflow. When there’s a blockage in the internal duct work, the hot air will become trapped inside the drum where it creates potential fire hazard. If you haven’t done so already, remove and clean the lint filter. Before placing the filter back, shine a flashlight into the slot-like area on the dryer to see if there’s any lint or debris stuck inside. If you see any, use a vacuum cleaner with a wand attachment to remove it.
Second - cycling thermostat. The cycling thermostat is a small metallic device that’s usually found in the rear of the dryer, although you’ll need to remove the back panel to access it. You can test the cycling thermostat with a multi-meter to determine whether or not it needs replacing. After removing the thermostat, place each of the meter’s probes on the wire terminals. If the multi-meter reads 0 or near 0, the electrical flow is good. If the meter reads infinity, the thermostat needs replacing.
Third - heating element. t’s not uncommon for heating elements to warp and/or shift over time, resulting in direct contact with the drum or other components. When this occurs, the heating element can warm up the drum significantly faster than usual. The coils of the heating element should not be touching the drum, each other, or any other component. If your dryer still overheating - don’t hesitate to contact our customer support and arrange a meeting!