If your washer make a loud noise during cycle - it’s time to check washer on damaged or non-working parts. In this article we will talk about loud noise in Washer Kenmore 110.2513*410, we will find most common solutions to remove noise.
First - Drive pulley damaged. When your washer makes loud noise when spinning, the first thing to check is the drive pulley. You’ll find the pulley around the drive motor and its function is to make the tub in your washer spin.After some time, the drive pulley can become worn, bent, and damaged. If washer not spinning, the belt may be broken. If the drive pulley is at fault and washer making loud noise during programm, the pulley needs to be replaced.
Second -Tub Bearing Defective. Check the tub bearing, located in the middle of the outer tub of washer Kenmore. Overload of your washer and using cheap detergents can damage the tub bearing to wear down over time, making your washing machine spin cycle very loud. Unfortunately, this is a complicated part to replace by yourself, so we recommend you to contact us, our experts can solve this problem and remove loud noise.
Third - motor coupling failure. This part of your washer is connected to and designed to protect the drive motor and transmission by washer overloading. Replace of this part will solve any issues with loud noise in your washer.
Fourth - clutch assembly worn out. The clutch assembly, which is connected to the transmission shaft, is responsible for how fast the inner tub spins. So that part could be loud problem of your washer. Since the clutch assembly affects the speed of the spin cycle, excessively wet clothes and loud noises indicate this part has worn down. If it’s necessary you need to change this part.