Each of us can't imagine life without a washer. It is very comfortable. Modern washers have a lot of programs, for making our life more easy. But what you must do, when your washer Carrier MWMTL095MWO won't start? There are not so many issues, most common - is to change washer timer. We will help you by giving a simple guide. Just follow step by step, and be careful. Before we started, you needed to have Phillips screwdriver, working gloves and washer timer.
Unplug your washer, shut off electricity and wear working gloves. With the timer knob pushed in, unscrew the timer knob and remove it. Pull the timer dial up and off the timer stem. Pull the plastic end caps off the sides of the control console. Remove the screws at the base of the control console. Pull the control console slightly forward and then swing it up and back over the top of the back panel. Unplug the timer wire harness. Remove the timer mounting screws. Pull the timer out of the control console. Position the new timer in the console and line up the mounting holes. Reinstall the mounting screws in the timer. Plug the timer wire harness back in. Flip the control console down and position it properly on the top panel of the washer. Reinstall the mounting screws at the base of the control console. Snap the plastic end caps onto the sides of the control console. Line up the dial pointer with the wide slot in the dial stem and push the timer dial onto the stem. Screw the timer knob onto the timer stem. Plug the washer into the electrical outlet.
Done! If your washing machine is still not turning you may need to call out an engineer to take an expert look at it.
