Solved! Trouble with dispenser soap in the dishwasher Carrier MDWFS014LSO

You have started the cycle in the dishwasher, and after found that dishes are dirty, you have a problem with detergent container. Inspect the dishwasher detergent container for damage. If the detergent container is broken or damaged, replace it. It’s not as difficult as seems. So let’s start to replace. We have prepared for you guide which helps you to replace detergent container in Carrier MDWFS014LSO and similar models. For replacing you need to have: Torx screwdriver, slot screwdriver, nut driver set, work gloves.

1. Unplug the dishwasher or shut off the house circuit breaker for the dishwasher. To verify that power is disconnected, make sure the control panel doesn’t light up when you press a control button or the power button.
2. With the dishwasher door open, remove the Torx screws from the inner door panel. Support the outer door panel with one hand as you remove the final 2 screws so the outer door panel doesn't fall. Separate the outer door panel and control panel slightly from the inner door panel, and let the outer panel rest on the floor while you disconnect the user interface control wire harness from the control panel. Pull off the outer door panel and control panel. 
3. Unplug the dispenser wire harness from the inner door. Remove the mounting bracket screws and pull off the mounting bracket, letting it hang by the dispenser wire harness. Release the dispenser locking tabs and pull the dispenser out of the door.
4. Insert the new dispenser and engage the locking tabs. Reinstall the mounting bracket and secure it with the screws. Plug in the dispenser wire harness.
5. Position the outer door panel and control panel close enough to the inner door so you can reconnect the user interface control wire harness. Reconnect the user interface control wire harness and attach the outer door panel and control panel to the inner door panel. Reinstall the mounting screws.
6. Reset the house circuit breaker or plug in the dishwasher to restore electrical power. 

Ready! Start a normal cycle, to ensure that detergent container dispensing soap as should. In case that you can’t replace detergent container - you can contact our customer support team and arrange an appointment at the convenient time.