It is really confusing when your heater gives up shutting off. Normally, when we think of a heating problem, we immediately think about the furnace not turning on. In case your heating system is constantly on, it will be impossible to use an appliance. Here are a few steps you can take to turn off the heat before giving a maintenance helper a call. Start with a thermostat. Check whether your fan is set to On or Auto. If it’s On, try setting it to Auto — this will turn the fan off when the temperature reaches the desired setting. If your thermostat is set extremely high, your furnace might not be able to keep up. A set temperature above 80 degrees strains almost any furnace, especially in a big house or in cold weather. Finally, look at whether your home’s temperature is above or below your set temperature. If it’s below, it means your furnace is working too hard and may have a clogged air filter. If it’s above, it means something might be more seriously wrong and it’s time to call Aspire. Air filters will also seek for your attention. They help regulate the furnace’s air supply, and can seriously overwork your furnace if they’re clogged. When your furnace turns on, its return ducts start pulling in air from your house to heat. Return ducts pass air through the filter, which removes dust, dirt, and other particles.A clogged filter prevents your furnace from getting the air supply it needs. It tries to make up for this by working overtime — but as the filter gets dirtier, this becomes less effective. Clean all your appliances in time and prolong their life!
November 26, 2023
AC is leaking from the coil – HVAC Troubleshooting in San Diego
Have you encountered a leaking air conditioner? This causes not the most pleasant feelings and deprives you of comfort. Before solving this problem, you should determine what exactly became the source of the air conditioner flow.
