Whirlpool Refrigerator Water Filter Repair

Don't be so quick to make a service call when your water filter stops working properly. Try these simple troubleshooting techniques and fixes first to save yourself money and frustration. Most likely the water filter has been clogged and now it needs replacement. Locate your water filter cover in the upper right-hand corner inside your refrigerator or in the base grille. Lift the filter door up. Pull the filter out and discard it. Open your new filter and remove the protective coverings from the O-rings. Make sure the O-rings are still in place after the cover has been removed. When inserting the new filter into the slot, make sure the arrow is pointing upward. Do not force the water filter. If it does not slide in easily, rotate it until the notches are properly aligned with the grooves. Push the filter door closed so it snaps into place. Once your filter is replaced, run four gallons of water through the line to properly flush the new filter. When the steps do not give a positive result even with a new water filter, the best approach will be to contact a repairman.