Washer - is the one of the most used appliances at home. If your washer drum belt is broken - don’t panic. It’s not a grave problem. You can fix it alone, without any help. In this article you will find simple instructions for drum belt replacing. This instruction is dedicated for owners Whirlpool wtw4800xq4.
- Unplug the front-load washer’s power cord before any disassembly.
- Since virtually all front-load washer belts are located behind a rear access panel, have an assistant help you to move the appliance away from the way.
- You may need to shut off the water supply and detach the inlet hoses before you can remove the rear panel.
- Unthread the mounting screws securing the rear access panel and remove the panel.
- Rotate the tub drive pulley while pulling the old belt up and out. You may want to notate the exact position of the belt on the motor shaft pulley, if still intact, before removing.
- Keeping the grooved-side facing inward, align the belt on the motor shaft pulley then loop it onto the tub drive pulley. Rotate the tub drive pulley to fully align the belt.
- Reposition the rear access panel and secure it with the mounting screws.
- Reattach the water inlet hoses, if applicable, and turn the water supply back on.
- Move the appliance back against the wall.
- Plug the washer’s power cord back in.
Fixed! You have replaced the drum belt in the washer, and now all problems are gone. If this doesn't work, there could be a defective part that requires a replacement, and you may need to consult a professional.