Failure to work does not always mean a breakdown of the Rheem furnace. A reset button could work, so that the furnace won’t turn on. Almost every Rheem furnaces have a reset button on their system. It’s a safety feature to shut down the furnace before it can trip the circuit breaker. When there is an electrical problem or your unit becomes very hot, the furnace reset button pops out. To get the system working again, you need to reset your RHEEM furnace using the reset button.
Such issue as poor or absent warm air flow is considered to be a minor issue, the owner can fix on their own. Turn the thermostat up and listen for the furnace to start. Carefully check that the furnace fan is working. You may need to remove the service panel on the furnace to make this check. Be careful. There are electrical circuits in this area that can be a potential shock hazard.
With the service panel off, the burners in the heat exchanger should be visible. The flames should be burning with consistent blue color and the fan below the heat exchanger should be running. If that doesn’t work, there is a strong necessity to order a maintenance visit for further investigation.
Prime Air Solutions experts have years of repair practice and lots of happy customers. We have a full-cycle company - our own specialists, equipment and transport. We take on any work related to furnaces. Clients pay for services in any convenient way. We offer our clients an "all inclusive" service. The clients do not need to be distracted from business at all. We will check the necessary parameters of your Rheem furnace, perform cleaning and remove faults.
To consult with a specialist, call at (619) 655-3355.
